Table of Contents
Advertisement
2
Safety
Shut down
6/20
Instruction Manual
w w w . b a i e r - g m b h . d e
2 Safety
Electric Shock
Danger to life and health due to electrical shock.
•
Electrical connections have to be installed by
approved personnel only.
•
Switch off power before carrying out work and secure
power against being switched on.
•
Observe relevant safety instructions.
2.1 Requirements for operation
Hint
Read the instruction manual before doing any work on the motor
control box.
2.1.1 Environmental conditions
The 24V 50VA motor control box is designed for use in dry interior.
2.2 Proper use
This product is a motor control device for 24V DC motors of the manufacturer. It is
powered by an internal 24V power supply. It allows connection to on-site switches
(Ground / Open / Close).
The manufacturer's instructions must be respected, in especially maximum and
minimum dimensions and maximum weight of the moving part.
Any other use of this product is considered inappropriate use.
It is not guaranteed, that this product will work in combination with fittings, motors
or other electronic devices of other manufacturers.
2.3 Behavior in case of an error
In case of an error, the device must be shut down and the manufacturer must be
informed.
Do not operate device.
Disconnect device from power supply.
Inform the manufacturer.
D A N G E R
24V 50VA Motor control box
- Version 1.0
Advertisement
Table of Contents
