IBM 22P6401 User Manual page 46

Note: The configuration changes made through the Web interface are
automatically saved into the flash memory within 30 seconds after
clicking Apply.
Fixed IP table
This feature is useful for those servers that want permanently assigned IP
addresses. These client computers are identified by their MAC addresses. To
permanently assign an IP address to a server, do the following:
1. Click Advanced Configuration → DHCP Configuration → Fixed IP to
display the Fixed IP table.
2. Click Add to add a new entry in the Fixed IP table.
v IP Address: The specified IP address for the client device. This IP
address must be within the address pool in the DHCP server.
v MAC Address: The MAC address of the client device
v Remark: The descriptions of the client device that needs the fixed IP
address
3. Click Apply. A new entry is added to the Fixed IP table.
Note: The configuration changes made through the Web interface are
automatically saved into the flash memory within 30 seconds after
clicking Apply.
Excluded IP table
The feature is useful when some of the IP addresses in the pool are already
manually assigned to client computers on the LAN. To exclude an IP address
from the DHCP server, do the following:
1. Click Advanced Configuration → DHCP → Excluded IP to display the
Excluded IP table.
®
6-8
IBM High Rate Wireless LAN Gateway: User's Guide