IBM 22P6401 User Manual page 35

9. Type the IP address of the server.
10. Click Add to insert the entry as the first item in the Installed Gateway
List.
11. Click the DNS tab.
12. Select Enable DNS.
13. Add the IP address of the server to the DNS Server Search Order list.
14. Save the changes, and then restart your computer. Your computer can
access the Internet through the server.
Setting up Windows 2000 Professional clients
Before setting up a Windows 2000 Professional client, be sure that the TCP/IP
protocol is installed with your Ethernet network card. See your Windows 2000
Professional manual for instructions on installing the TCP/IP protocol.
Use the built-in DHCP server to configure the TCP/IP settings of your
Windows 2000 Professional computer. The server provides the following
TCP/IP configuration information to your computer:
v IP address of the computer
v Subnet mask of the computer
v IP address of the default gateway, which is also the IP address of the server
v DNS server
To configure a Windows 2000 Professional computer as your client computer,
do the following:
1. Click Start→ Settings → Control Panel.
2. Double-click the Network and Dial-up Connections icon.
3. Right-click the icon for the network connection.
4. Select Properties.
5. Select Internet Protocol (TCP/IP) from the components list.
Part 5: Setting up client computers for Internet access
5-3