IBM 22P6401 User Manual page 36

6. Click Properties.
7. Click to check the Obtain an IP address automatically radio button.
8. Click to check the Obtain DNS server address automatically radio
button.
9. Click OK.
10. Click OK again.
11. Restart your computer. Your computer is able to access the Internet
through the server.
Manual configuration: If you do not want to use DHCP service, you must
manually configure the IP address of your computer, To manually configure
the IP address f your computer, do the following:
1. Click Start → Settings → Control Panel.
2. Double-click Network and Dial-up Connections.
3. Right-click the icon for the network connection.
4. Select Properties.
5. In the network protocols list, double-click TCP/IP.
6. Click to check the Specifying an IP address radio button.
7. Type the IP address for your computer.
®
5-4
IBM High Rate Wireless LAN Gateway: User's Guide