Sony ZV-1 Service Manual page 84

7. Turn the Lubricating Block Assy (B)* counterclockwise to the maximum extent.
*) Use a Lubricating Block Assy (B) that was not installed in the unit.
8. Install the Wheel Lubricating Block Assy, the Gear A Lubricated Assy and the Lubricating Block Assy (B).
9. Attach the Rear Tube Mirror Block Assy and tighten five screws in numerical order in the following figure.
4
2
3
10. Install the connector part of the LF-2091 Flexible Board to the holes of the Stationary Tube.
Holes
Lubricating Block Assy (B)
Lubricating Block Assy (B)
Gear A Lubricated Assy
Wheel Lubricating Block Assy
1
5
Rear Tube Mirror Block Assy
Holes
Sony CONFIDENTIAL
For Authorized Servicer
76
SYS SET