Sony ZV-1 Service Manual page 82

Installation
1. Match the 1st Group Press Block of the 1 Group Frame Block Assy with the cabinet number of the 2nd/3rd group assy and
install the 1 Group Frame Block Assy while turning it clockwise.
Note
• If Ornamental Ring (A) and Barrier Block Assy is installed to 1 Group Frame Block Assy, remove them first.
• Be careful not to lose the 1st Group Press Block.
• When installing the 1 Group Frame Block Assy, stop turning it when the convex parts of the 1st Group Press Block and the
2nd/3rd group assy match.
1 Group Frame Block Assy
2nd/3rd group assy
2. Install the Straight Tube Block Assy matching its cabinet number with the flexible boards position of the 1st/2nd/ 3rd group assy.
Cabinet number
Flexible boards
1st/2nd/3rd group assy
3. After turning the Straight Tube Block Assy counterclockwise about eight degrees to fully install it, turn the Straight Tube Block
Assy clockwise to the maximum extent to fit the bayonet.
About 8°
1st Group Press Block
Cabinet number
Straight Tube Block Assy
Straight Tube Block Assy
Sony CONFIDENTIAL
For Authorized Servicer
Gap
74
SYS SET