Sony ZV-1 Service Manual page 74

Assembly order 5
Notes on Assembling the Rear Panel Cab Assy (2)
When installing the rear panel cab assy, tighten screws in the order of (1) to (4).
Rear panel cab assy
Assembly order 6
Notes on Assembling the MG Sensor Adhesive A (64500)
Attach the MG sensor adhesive A (64500) as shown in figure.
Assembly order 7
Notes on Assembling the SV Hinge Cover Front
Confirm after installing the SV hinge cover front.
There is no gap.
SV hinge cover front
OK
Attaching standard
MG sensor
adhesive A
(64500)
NG
There is a gap.
Sony CONFIDENTIAL
For Authorized Servicer
66
SYS SET