Reef Factory kH keeper Manual page 10

WARNING: each change of the device installation location, shortening or lengthening
the hoses, connecting additional accessories, such as filters or check valves in the
water or reagent supply circuit in kH, requires recalibration of the device.
7. To perform kH measurements, it is necessary to purchase a reagent.
WARNING: To ensure the highest accuracy of measurements, it is necessary to use
only a dedicated Reef Factory reagent. The use of other than the dedicated one will
result in incorrect measurement.
8. The device can be configured using a web browser on your computer, laptop, tablet or
smartphone. To do this, display the list of Wi-Fi wireless networks available on the selected
device, then search for and connect to the network which name corresponds to the serial
number of the device, according to the formula:
Our devices are working in 2,4 GHz technology. To log in, please provide password:
When you are connecting to a Reef Factory device, the connection status may state'no
internet'. Please ignore it. This appears on a smartphone, tablet, laptop or any other device,
because you are connected to a Reef Factory device WiFi and you have no internet access
WARNING: Be sure you are in range of device WiFi network.
9. Whilst connected to the device WiFi module, open a browser and type in the following:
www.khkeeper.io
If after entering the correct website address, the following message appears on the screen,
it means that the connection with the device has not been established, and the connection
to your home internet network (wired or wireless) is still active.
KH Keeper Manual
RFKHXXXXXXXXXXXX
reeffactory
through these devices.
10 36 /