Mio C230 User Manual page 88

If you want to ...
use an existing custom
POI category
create a new custom POI
category
4. Complete the following:
If you want to ...
select an icon to display
on the map screens for
POIs of the category
enable a visual warning
when a POI of this
category is in close
proximity
enable a warning sound
when a POI of this
category is in close
proximity
select the distance from a
POI of this category at
which the visual warning
should display or the
warning chime should
sound
82
Then ...
select the Existing Category option, then select a type from
the drop down list..
select the New Category option, then type a name for the
POI category.
Then ...
Click Browse to select the icon file from your local or
network drive. When you have located the icon file, select it
and click Open.
The icon file must be a bitmap (.bmp) graphic with a
minimum size of 6x6 pixels and a maximum size of 32x32
pixels.
Note: If you do not select a custom icon, a default icon will
display.
select the Visual alert check box.
select the Audio alert check box.
select the distance from the Distance box.
Note: To change the units used to measure distance for this POI
category, from the tools menu click on options and from the
general option select Use metric units check box.
Note: Mio is not responsible for the content or accuracy of the
information or the reliability or availability of these websites. The
use of information regarding safety camera locations may be
subject to local laws in the country of use. You are responsible for
checking that you can use the information in your country or in
the country where the information will be used.