Makita TD001G Instruction Manual page 14

Erasing the quick mode-switching function
Press and hold the button
NOTE: After erasing the quick mode-switching function, the quick mode-switching button works for changing the
impact force.
Indication patterns
Application mode
4 (Max)
3 (Hard)
2 (Medium)
1 (Soft)
Wood mode
T mode (1)
T mode (2)
Bolt mode (1)
Bolt mode (2)
Bolt mode (3)
: The lamp is on.
: The lamp is blinking.
and button at the same time until all impact force grade lamps blink.
While registering the application mode When the registered application mode
14 ENGLISH
turns on