PROAIM Wave-2 Plus Assembly Manual page 3


Loosen the knobs of Jib arm to extend front telescopic post of Jib. Then extend Jib as per your
requirement and tighten all knobs to secure.
Camera Mounting Setup

Loosen bolts of Jib bowl & remove adapter plate. Mount your fluid head set-up onto bowl plate and
lock it with locking adapter. Now remove tripod plate from it.

Attach tripod plate to your Camera and secure. Now mount your camera set-up onto fluid head
Included) and secure it with help of provided knob.

LCD Mounting: Attach your LCD Mounting Arm to Jib Fork and tighten it properly to secure. Now
screw in LCD (Not Included) to arm and tighten its knob after positioning the angle of LCD Arm.
3
(Not