Advertisement
EnglisH
1
How to replace the filter cartridge
1
Close the tap and set the water selection lever to the unfiltered
stream position (Fig. 19).
Turn the cover anticlockwise to remove it from the filter
housing (Fig. ).
Remove the cover with the filter attached from the filter
housing (Fig. ).
Turn the filter cartridge clockwise to remove it (Fig. 29).
5
Screw the new filter cartridge anticlockwise into the cover of the
filter housing (Fig. 30).
6
Insert the cover with the cartridge attached into the filter
housing (Fig. 1).
Turn the cover clockwise to tighten it (Fig. ).
Make sure the cover is tightened firmly.
Environment
-
Do not throw away the water purifier with the normal household
waste at the end of its life, but hand it in at an official collection point
for recycling. By doing this, you help to preserve the
environment (Fig. 33).
guarantee & service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone number in the
worldwide guarantee leaflet). If there is no Consumer Care Centre in
your country, go to your local Philips dealer.
Advertisement
