Cocoon DY180381 Quick Start Manual

Cocoon DY180381 Quick Start Manual

Advertisement

1. BEFORE YOU START

Scan this code
or search for
Cocoon Connect
Before you begin, make sure you have:
1. A mobile device - Android (V4.1 or later) or iOS (V8 or later)
2. Each of your Security Sensors
3. A Wi-Fi connection (have the password handy)
4. Download the Cocoon Connect app
For detailed instructions and videos, visit www.cocoonproducts.com.au

2. App Setup

First time users:
Register an account and follow the remaining prompts on screen
3. Connect One device
at a Time
Only remove battery tabs or plug in sensor when beginning to connect
that device
Follow steps 4 - 6 for each device you want to set up

4. Begin pairing mode

ONLY TURN ON ONE DEVICE AT A TIME
The LED on each of the Smart Security Devices should be
flashing twice per second
If not, press the Reset Button on the device and hold for six
seconds. The LED should now flash twice per second

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DY180381 and is the answer not in the manual?

Questions and answers

Philippe
June 10, 2025

how to default the Cocoon DY180381 Smart Security Kit components. I want to set the system to a totally different house

Summary of Contents for Cocoon DY180381

  • Page 1 3. A Wi-Fi connection (have the password handy) Only remove battery tabs or plug in sensor when beginning to connect flashing twice per second 4. Download the Cocoon Connect app that device First time users: If not, press the Reset Button on the device and hold for six For detailed instructions and videos, visit www.cocoonproducts.com.au...
  • Page 2 If you have any issues with this step, ensure your password is correct Each Smart Security device will stop flashing to indicate it has Use, manage and control your Smart Security Kit from the Cocoon Siren = Alarm (Wi-Fi) ONLY ADD ONE DEVICE AT A TIME...

Table of Contents