Step 5 - Connect Roomba® To Your Wi-Fi; Step 6 - Activate Roomba® - iRobot Roomba i7 Faq

Type a name and press "Continue".

Step 5 - Connect Roomba® to Your Wi-Fi
The iRobot® HOME App will display the name of the Wi-Fi network that the mobile device is
currently connected to. Confirm this is the network you would like to use.

iOS: To set up Roomba® on a different network with an iOS device, select the Wi-Fi
network in the iRobot® HOME App and change the network in the settings of the mobile
device.

Android: To set up Roomba® on a different network with an Android device, press
"Change Wi-Fi network" and choose the network you would like to connect to from the
menu.

Enter your Wi-Fi network password.
If no password is required, check the box on the screen and "Continue".

Note: If you receive a message at the end of the setup process that indicates an incorrect
password, be sure that you have entered your Wi-Fi network password correctly. Ensure
it contains only alpha-numeric characters.
Step 6 - Activate Roomba®
This step turns on Roomba's internal Wi-Fi network so that your device can locate the robot.

With the robot on its base, press and hold
simultaneously until you hear a tone (about 2-5 seconds).
o
Some robots show a flashing green
o Some robots show a flashing blue light ring

Confirm step in the App: check the tick box that says, "I pressed the buttons", and press
continue.
From here, your device should locate the robot and you'll now be able to adjust and control it
through the iRobot HOME App.
If you're unable to connect:

Ensure you meet the

Turn off cellular data (referred to as mobile data on some devices) and try again.
If you need assistance with the Wi-Fi setup process, please visit
Wi-Fi setup requirements.
Home and SPOT Clean buttons
Wi-Fi icon
Roomba® Wi-Fi Setup.