Advertisement
Problem
Steam lock
cannot be
activated.
Steam does
not stop
automatically
after placing the
steamer head
onto the holder.
The board cover
becomes wet or
there are water
droplets on the
garment during
steaming.
Board is shaky
during use.
Possible cause
Water tank has
been overfilled.
Fail to enter
steam lock
function.
Steam lock
function is
activated.
Steam has
condensed on the
board cover after
a long steaming
session.
The poles are not
installed properly
or the board is
not secured onto
the poles.
The board lock is
not fully inserted.
The board is not
fully secure in
vertical position.
Solution
Fill water up to its MAX
marking.
Double tap to activate
the steam lock function
( refer to
).
Press once to
deactivate steam lock
( refer to
).
Leave it to dry before
storage. Replace the
board cover if it has
worn out. Purchase a
new board cover from
a Philips Authorized
Service Center.
Refer to
for correct
installation.
Insert the two board
locks fully until you hear
a "click" sound (refer to
).
Make sure that the
board tilting lever is in a
locked position before
attaching it to the poles
).
( refer to
35
Advertisement
