Add Points To A Saved Survey (1 Of 2) - Laser Technology TruPulse 200X Manual
Lasersoft quickmap 3d android quick reference add points to a saved survey
Hide thumbs
Also See for TruPulse 200X:
- User manual (62 pages) ,
- Quick reference field manual (14 pages) ,
- Quick reference manual (11 pages)
Table of Contents
Advertisement
Add Points to a Saved Survey (1 of 2)
1. Set up on the last instrument position occupied when the original survey was
mapped.
2. Power on all equipment.
3. Open QuickMap and tap [Saved Surveys].
4. Tap
. Wait a few seconds for the laser to respond and prompt for the leveling
routine.
5. Level the TruPoint. See Slide 19 for more information on that procedure.
6. Long-press the
implements the routine for moving your instrument position. Ensure that you see
the dialog as displayed in Figure A that DOES NOT say "Move to Point."
TruPoint 300
icon to display the re-zeroing dialog. A short press on this icon
Advertisement
Table of Contents
Need help?
Do you have a question about the TruPulse 200X and is the answer not in the manual?