Removing The Actuator From The Valve; Removing The Regulator From The Pipeline - Samson 42-36 E Mounting And Operating Instructions

Removal
11.1 Removing the actuator
from the valve
Note
Read the mounting and operating instruc-
tions of actuators with fail-safe action (see
documents listed under 'Referenced docu-
mentation' in the 'Safety instructions and
measures' section).
1. Unfasten electric actuator (1) from the
valve body (20) (see 'Replacing the actu-
ator' in the 'Servicing' section).
11-2
11.2 Removing the regulator
from the pipeline
1. Support the regulator to hold it in place
when separated from the pipeline (see
the 'Shipment and on-site transport' sec-
tion).
2. Unbolt the flange joint.
3. Remove the regulator from the pipeline
(see the 'Shipment and on-site transport'
section).
11.3 Removing the actuator
from the valve
See 'Replacing the actuator' in the 'Servic-
ing' section.
EB 3018 EN