Installation - Samson 42-36 E Mounting And Operating Instructions

5.3 Installation

The components (actuator, valve, control line,
accessories) of the SAMSON regulator are
delivered separately. The activities listed be-
low are necessary for installation and before
start-up of the regulator.
NOTICE
!
Risk of regulator damage due to exces-
sively high or low tightening torques.
Observe the specified torques when tighten-
ing regulator components. Excessive tighten-
ing torques lead to parts wearing out more
quickly. Parts that are too loose may cause
leakage.
Î Observe the specified tightening torques
(see 'Tightening torques' in Annex).
NOTICE
!
Risk of regulator damage due to the use of
unsuitable tools.
Î Only use tools approved by SAMSON
(see 'Tools' in Annex).
NOTICE
!
Risk of regulator damage due to the use of
unsuitable lubricants.
Î Only use lubricants approved by
SAMSON (see 'Lubricants' in Annex).
EB 3018 EN
Installation
5-5