Samson 42-36 E Mounting And Operating Instructions page 15

NOTICE
!
Risk of damage to the screw heads on the front housing cover (Type 5824 and
Type 5825) due to the use of the wrong tool.
The front housing cover of the electric actuator is fastened using TORX PLUS
size 10IP.
Î To loosen and tighten the screws, only use the following screwdrivers:
− TORX T10
®
− TORX PLUS
− Flat-blade screwdriver with 0.8 mm blade thickness and 4.0 mm blade width
Note
SAMSON's After-sales Service can support you concerning lubricant, tightening torques
and tools approved by SAMSON.
EB 3018 EN
10IP
®
Safety instructions and measures
screws,
®
1-11