HAMPTON BAY LAUREL OAKS MOTION Use And Care Manual page 13

Assembly
1
Attach the chair back to the chair seat
Attach the chair back (A) to the chair seat (D) using M6 bolts
(AA) and washers (BB).
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Adding
BB
AA
3
Atta ch the left arm to the seat and
back
Atta ch the left am (B) to the chair seat (D) and chair back (A)
using M6 bolts (AA) and washers (BB).
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Adding
CC
AA
BB
.
DD
CC
A
D
.
BB
CC
AA
B
D
2
Attach the right arm to the seat and back
Attach the right arm (C) to the chair seat (D) and chair back (A) using
M6 bolts (AA) and washers (BB).
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Adding
BB
AA
CC
D
4
Add cushions
Add seat cushion (E) and back cushion (F).
E
5
.
C
BB
A
F
CC
AA