Charge Your Zoleo Communicator; Activate Your Zoleo Communicator - Iridium Zoleo User Manual

ZOLEO Global Satellite Communicator User Manual

5.1 Charge your ZOLEO communicator

The ZOLEO communicator is powered by a rechargeable battery. The battery cannot be
removed.
IMPORTANT: You will not be able to use the ZOLEO communicator until you start charging. It is
recommended that you fully charge your ZOLEO communicator before you start using it. In
standby mode, the battery will be able to supply power for more than 200 hours. This figure is
reduced once messages are sent and received.
For quickest charging, use a USB-compliant 1.5 A charger is recommended. You must supply
this yourself as it is not included in the package. A standard 5 V USB car charger or a wall
charger can be used.
To charge your ZOLEO communicator:
1. Open the cover that protects the USB port.
2. Connect the USB charging cable between the USB port and the car or wall charger.
3. Connect the charger to a power source.
While charging is in progress, the
charged. If the ZOLEO communicator is on, the LED will flash at regular intervals.

5.2 Activate your ZOLEO communicator

Your ZOLEO communicator must be activated online before it can be used. You will require
access to the following information:
• ZOLEO communicator IMEI number and serial number (found on the label on the back of
your ZOLEO communicator)
• Contact details of two (2) people who are to be contacted in the event of an SOS
• Contact details of one (1) person who you want to send check-in messages to and
• Credit card information (used to pay for your pricing plan charges).
Except for the IMEI and serial number, this information can be changed later.
To activate your ZOLEO communicator, go to www.ZOLEO.com/activate.
Power LED is lit amber and changes to green when fully
9