Download Print this page

Vestil PM4-LP Series Instruction Manual

For low profile 4,000 lbs. pallet truck

Advertisement

Quick Links

Advertisement

loading

Summary of Contents for Vestil PM4-LP Series

  • Page 2 Hand Pallet Truck Note: Owner and operator MUST read and understand this operating instructions before use this pallet truck. Thank you for choosing our pallet truck. For your safety and correct operation, please carefully read the manual before use. NOTE: All of the information reported herein is based on data available at the time of printing.
  • Page 3: Maintenance

    (D133) counter-clockwise until the forks do not lower. 3.3 If the forks do not descent when the control handle (D608 or D608S) is in the LOWER position, turn the nut (D615) or adjusting screw(D133) clockwise until raising the control handle(D608 or D608S) lowers the forks.
  • Page 4: Troubles Shooting

    5.6 Do not handle unstable or loosely stacked loads. 5.7 Do not overload the truck. 5.8 Always place loads centrally across the forks and not at the end of the forks (See Fig. 2). 5.9 The capacity of the truck assumes an evenly distributed load with the centre of the load being at the halfway point of the length of the forks.
  • Page 5 HANDLE ASSEMBLY...
  • Page 6 PARTS LIST OF HANDLE TYPE A Description Qty. Remark Description Qty. Remark PM4-L101-H-A Spring PM4-L110-H-A Handle For TYPE A For TYPE B PM4-L102-H-A Blade Spring L110B Handle (Not available) PM4-L103-H-A Roller PM4-L111-H-A Bolt PM4-L104-H-A Elastic pin PM4-L112-H-A Elastic Washer PM4-L105-H-A Elastic pin PM4-L113-H-A Pull Rod...
  • Page 7 FORK FRAME ASSEMBLY PARTS LIST OF FORK FRAME Description Qty. Description Qty. PM4-201SL-F Fork Frame PM4-211SL-F-33 Long Shaft – 33” PM4-202SL-F Bolt PM4-212SL-F Shaft PM4-203SL-F-20 Rock-Arm - (TRUNION) -20" WIDE PM4-213SL-F Elastic Pin PM4-203SL-F-27 Rock-Arm - (TRUNION) - 27" WIDE PM4-214SL-F Washer PM4-203SL-F-33 Rock-Arm - (TRUNION) - 33"...
  • Page 8 PARTS LIST OF PUMP...
  • Page 9 Part List of Pump Description Qty. Remark Description Qty. Remark Retaining Ring PM4-L301-P PM4-L326-P Pressure Roller (for axle) PM4-L302-P Hub Cap PM4-L327A-P Bushing PM4-L303-P Washer PM4-L328A-P Elastic Pin For OLD PM4-L304-P Shaft of wheel PM4-L329A-P Elastic Pin TYPE PM4-L305-P Bearing - 6204 2RS PM4-L330-P Bushing Should bolt...