Advertisement
Quick Links
Table of Contents
ALL-T-(2 or 4)-GPT
ALL-T-(2 or 4)-GPT-L
ALL-T-(2 or 4)-GPT-10HP
ALL-T-(2 or 4)-GPT-L-10HP
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading. If
the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance comply with laws,
regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Assistance:
If you have questions that are not addressed in these instructions and to order replacement parts, labels, and
accessories, call (260) 665-7586 and ask for the Service and Parts Department. The department can also be
contacted online at http://www.vestilmfg.com/parts_info.htm.
Specifications....................................................................................................................................................... 2,
Applicable National Standards...............................................................................................................4
Signal
Words..........................................................................................................................................................
Hazards......................................................................................................................................................................
Operating the
Truck..............................................................................................................................................
Fork Carriage
Controls............................................................................................................................
Lifting and Transporting
Parking
Brake.......................................................................................................................................................
Disengaging the Transmission (Neutral
Record of Satisfactory
Condition............................................................................................................
Inspections and
Maintenance................................................................................................................
Complete Exploded Views & Bill of Materials............................................................................................9 - 16
ALL-T-2-GPT; ALL-T-4-GPT; ALL-T-2-GPT-L; &
ALL-T-2-GPT-10HP; ALL-T-4-GPT-10HP; ALL-T-2-GPT-L-10HP; &
ALL-T-2-GPT-PT; ALL-T-4-GPT-PT; ALL-T-2-GPT-L-PT; &
ALL-T-2-GPT-PT-10HP; ALL-T-4-GPT-PT-10HP; ALL-T-2-GPT-L-PT-10HP; &
Rear Wheel Axle Assemblies (1) and (2) Exploded Views and Bills of
Steering Handle Subassembly Exploded View and Bill of
Power Unit Subassembly Exploded Views and Bills of Materials................................................................... 19-22
ALL-T-2-GPT &
ALL-T-4-GPT...........................................................................................................
ALL-T-2-GPT-10HP; ALL-T-4-GPT-10HP; ALL-T-2-GPT-L-10HP; &
ALL-T-2-GPT-PT; ALL-T-4-GPT-PT; ALL-T-2-GPT-L-PT; &
ALL-T-2-GPT-PT-10HP; ALL-T-4-GPT-PT-10HP; ALL-T-2-GPT-L-PT-10HP; &
Sprocket Drive Subassemblies, Right Side, Exploded Views and Bills of
Sprocket Drive, Subassemblies, Left Side, Exploded Views and Bills of
Labeling
Diagram................................................................................................................................
Limited
Warranty................................................................................................................................
Table of Contents
All Terrain Pallet Truck
Instruction Manual
Loads..............................................................................................................
Mode)..........................................................................................
Copyright 2019 Vestil Manufacturing Corp.
Rev. 8/7/2019
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
http://www.vestilmfg.com/
ALL-T-(2 or 4)-GPT-PT
ALL-T-(2 or 4)-GPT-L-PT
ALL-T-(2 OR 4)-GPT-PT-10HP
ALL-T-(2 or 4)-GPT-L-PT-10HP
Table of Contents
ALL-T-4-GPT-L..............................................................
ALL-T-4-GPT-L-10HP...............................
ALL-T-4-GPT-L-PT..........................................
Materials...............................................
Materials...............................................................
ALL-T-4-GPT-L-10HP............................
ALL-T-4-GPT-L-PT..........................................
Materials...........................................
Materials............................................
ALL-T-2/4-GPT MANUAL
e-mail:
info@vestil.com
ALL-T-4-GPT-L-PT-10HP........
ALL-T-4-GPT-L-PT-10HP........
Page 1 of 26
3
4
4
5
5
-
6
6
7
7
7
7
-
8
9
-
10
11-12
13-14
15-16
17
18
19
20
21
22
23
24
25
26
Advertisement
Related Manuals for Vestil ALL-T-2-GPT
Summary of Contents for Vestil ALL-T-2-GPT
- Page 1 Brake………………………………........................Disengaging the Transmission (Neutral Mode)...…………………………………………………………………………… Record of Satisfactory Condition……………………………………………………………………………………………… Inspections and Maintenance…………………………………………………………………………………………………. Complete Exploded Views & Bill of Materials………………………………………………………………………………..9 - 16 ALL-T-2-GPT; ALL-T-4-GPT; ALL-T-2-GPT-L; & ALL-T-4-GPT-L…………………………………………………….. ALL-T-2-GPT-10HP; ALL-T-4-GPT-10HP; ALL-T-2-GPT-L-10HP; & ALL-T-4-GPT-L-10HP…………....11-12 ALL-T-2-GPT-PT; ALL-T-4-GPT-PT; ALL-T-2-GPT-L-PT; & ALL-T-4-GPT-L-PT…………………………………… 13-14 ALL-T-2-GPT-PT-10HP; ALL-T-4-GPT-PT-10HP; ALL-T-2-GPT-L-PT-10HP; &...
- Page 2 221.1cm 33.0cm 115.3cm 99.9cm 484.1kg 1818.2kg ” 48” 12” ” 16” ” ” 1162 lb. 4000 lb. ALL-T-4-GPT-L-10HP 344cc 211.9cm 121.9cm 30.5cm 230.0cm 40.6cm 123.2cm 99.9cm 528.2kg 1818.2kg Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 2 of 26...
- Page 3 121.9cm 50.8cm 239.6cm 119.9cm 117.5cm 620.9kg 1818.2kg ” 48” 20” ” ” ” 1401 lb. 4000 lb. ALL-T-4-GPT-L-PT- 344cc 10HP 221.5cm 121.9cm 50.8cm 239.6cm 119.7cm 117.2cm 636.8kg 1818.2kg Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 3 of 26...
- Page 4 • Reduce speed during turns. Turn slowly and carefully. • Avoid running over loose objects on the roadway surface. • DO NOT modify the truck in any way without express, written approval from Vestil. Unapproved modifications automatically void the Limited Warranty on p.
- Page 5 Grasp the knob of the fork carriage control lever and push it forward i.e. away from you/towards the truck. The hydraulic cylinder extends and causes the carriage to rise. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 5 of 26...
- Page 6 4. Set the pallet on the ground by lowering the forks. When the pallet rests on the ground, extract the forks from the pallet by driving the truck in reverse. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 6 of 26...
- Page 7 Inspect the following components: 1. Motor: Maintain the motor as instructed in the manufacturer’s manual. The manual is provided with the unit. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 7 of 26...
- Page 8 5. Before each use make sure all labels are in place & in readable condition. See Labeling diagram on p. 25. 6. Periodically clean dirt and debris from all surfaces to keep the finish in good condition. Store the unit indoors. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 8 of 26...
- Page 9 Table of Contents 8/7/2019 ALL-T-2/4-GPT MANUAL Complete Exploded View and Bill of Materials: ALL-T-2-GPT, ALL-T-4-GPT, ALL- T-2-GPT-L, & ALL-T-4-GPT-L 50-006-014 Item Part no. Description Qty. Item Part no. Description Qty. Weldment, frame assembly: 50-514-004 ALL-T-2-GPT & ALL-T-4-GPT 50-540-006 Weldment, shifter plate 50-514-022 ALL-T-2-GPT-L &...
- Page 10 Sprocket Drive Subassembly, Left Side, Exploded View(s) Item 8 shown in Sprocket Drive Subassembly, Right Side, Exploded View(s) on p. 23. •••• * Components of Power Unit Subassembly 50-160-002 on p. 20. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 10 of 26...
- Page 11 Table of Contents 8/7/2019 ALL-T-2/4-GPT MANUAL Complete Exploded View and Bill of Materials: ALL-T-2-GPT-10HP, ALL-T-4-GPT- 10HP, ALL-T-2-GPT-L-10HP & ALL-T-4-GPT-L-10HP 50-006-015 Item Part no. Description Qty. Item Part no. Description Qty. Weldment, frame assembly: 50-514-024 ALL-T-2-GPT-10HP & ALL-T-4-GPT-10HP 50-026-001 Shaft, drive 50-514-025 ALL-T-2-GPT-L-10HP &...
- Page 12 24. •••• Item 8 shown in Sprocket Drive Subassembly, Right Side, Exploded View(s) on p. 23. * Components of Power Unit Subassembly 50-160-003 on p. 20. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 12 of 26...
- Page 13 Table of Contents 8/7/2019 ALL-T-2/4-GPT MANUAL Complete Exploded View and Bill of Materials: ALL-T-2-GPT-PT, ALL-T-4-GPT-PT, ALL-T-2-GPT-L-PT, & ALL-T-4-GPT-L-PT 50-006-022 Item Part no. Description Qty. Item Part no. Description Qty. 50-214-027 Subassembly, frame, tilt 50-026-002 Shaft, drive 50-514-023 Weldment, frame assembly...
- Page 14 24. •••• Item 14 shown in Sprocket Drive Subassembly, Right Side, Exploded View(s) on p. 23. * Components of Power Unit Subassembly 50-160-004 on p. 21. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 14 of 26...
- Page 15 Table of Contents 8/7/2019 ALL-T-2/4-GPT MANUAL Complete Exploded View and Bill of Materials: ALL-T-2-GPT-PT-10HP; ALL-T-4- GPT-PT-10HP; ALL-T-2-GPT-L-PT-10HP; & ALL-T-4-GPT-L-PT-10HP 50-006-026 Item Part no. Description Qty. Item Part no. Description Qty. 50-214-026 Subassembly, frame, tilt 50-145-004 Coupler, drive shaft 50-538-002 Weldment, carriage...
- Page 16 24. •••• Item 13 shown in Sprocket Drive Subassembly, Right Side, Exploded View(s) on p. 23. * Components of Power Unit Subassembly 50-160-005 on p. 22. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 16 of 26...
- Page 17 Bearing, ball, low speed, 50-110-003 rear wheel 50-110-008 Bearing, seal Rear Wheel Axle Assembly (2) Exploded View and Bill of Materials ALL-T-2-GPT-PT; ALL-T-4-GPT-PT; ALL-T-2-GPT-L-PT; ALL-T-4-GPT-L-PT; ALL-T-2-GPT- 10HP; ALL-T-4-GPT-10HP; ALLT-2-GPT-L-10HP; ALL-T-4-GPT-L-10HP; ALL-T-2-GPT-PT- 10HP; ALL-T-4-GPT-PT-10HP; ALL-T-2-GPT-L-PT-10HP; ALL-T-4-GPT-L-PT-10HP 50-623-002 Return to 13; or Item Part no.
- Page 18 50-022-002 ”-20x2 ” open Nylon lock nut, gr. 2, z-finish 37018 50-034-001 Boot, switch ”-20 Hex bolt, gr. A, z-plated, Weldment, frame, handle 11009 50-514-040 ”-16x1 ” mount Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 18 of 26...
- Page 19 ”-20x4” hex bolt, gr. A, z-plated 99-031-095 Accessories, clamp, 2 ear, 1 ” ”-20 Nylon insert lock nut, gr. 2, 37018 99-031-096 Accessories, clamp, 2 ear, 1 ” z-finish Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 19 of 26...
- Page 20 99-116-073 Fitting, hydraulic, 06MJ-08MP 90° finish ”-16x1 ” hex bolt, gr. A, zinc 11109 99-116-074 Fitting, hydraulic, 06MJ-12MP 90° finish ”-16 Nylon insert lock nut, gr. 2, z- 37024 finish Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 20 of 26...
- Page 21 99-031-095 Accessories, clamp, 2 ear, 1 ” z-finish ”-16x1 ” hex bolt, gr. A, zinc 11109 99-031-096 Accessories, clamp, 2 ear, 1 ” finish ”-16 Nylon insert lock nut, gr. 2, 37024 z-finish Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 21 of 26...
- Page 22 Hex bolt, gr. A, z-finish, ”-16 x 1 ” tank Subassembly, hose, bottom tilt, 50-623-014 bulkhead to block & lift, bulkhead to 11003 Hex bolt, gr. A, z-plated, ”-20 x ” cylinder Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 22 of 26...
- Page 23 Thread cutting screw, slotted, type 32416 ”-18 x ” 11053 Bolt, HHCS, z-plated, ”-18 x ” 36104 Hex nut, gr. A, z-plated, ”-18 99-130-003 Pin, key stock 99-130-002 Pin, key stock Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 23 of 26...
- Page 24 ”-18 x 11053 ” 36104 Hex nut, gr. A, z-plated, ”-18 99-130-003 Pin, key stock Sprocket Drive Subassembly, Left Side Exploded View and Bill of Materials ALL-T-2-GPT; ALL-T-4-GPT; ALL-T-2-GPT-L; and ALL-T-4-GPT-L (50-542-003 & 50-542-005 p. 9 Item Part no. Description Qty.
- Page 25 (p. 7) **New labels to provide the information mandated in part 8.5 of B56.6 are being created. When finished, they will replace labels B and D in the diagram.** Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 25 of 26...
- Page 26 Vestil Manufacturing Corp. makes no other express warranties. All implied warranties are disclaimed to the extent allowed by law. Any implied warranty not disclaimed is limited in scope to the terms of this Limited Warranty. Vestil makes no warranty or representation that this product complies with any state or local design, performance, or safety code or standard.