Configuration Switches And Jumpers (J1 And S2) - Motorola M68EM05D32 User Manual

3.1.3 Configuration switches and jumpers (J1 and S2)

Jumper header J1 and switch array S2 are required for a different configuration of the printed
circuit board. For correct D32EM operation Jumper J1 must always be in the C/D position
and the switch array must have all switches in the closed position as shown below.
(2)
M68EM05D32/D
HC05EVS CONFIGURATION AND OPERATION
FABRICATED
JUMPER
J1
C/D
1
CA
(3)
S2
0
1
2
3
4
5
6
7
Open Closed
3-4 MOTOROLA