Advertisement
Checking the remaining battery power
Check the remaining battery power by pressing the Battery level
button.
The indicator lights alerts you to the remaining battery power.
Remaining battery
power
70–100 %
40–70 %
20–40 %
5–20 %
0–5 %
Using the battery pack
Cable charging
1. Connect one end of the USB cable to the battery pack's USB
2. After the mobile device is fully charged, disconnect the USB
6
U1200_QSG_EU_ASIA_Type.indb 6
Indicator light status
Four indicator lights on
Three indicator lights on
Two indicator lights on
One indicator light on
One indicator light blinking
charger port. Then, plug the other end of the USB cable into
the mobile device's multipurpose jack.
cable from both devices.
Depending on your mobile device's multipurpose jack,
you may need to use the Micro USB connector.
2018-12-18 오후 4:46:35
Advertisement
