Filter Reset; Storage - Philips AC1215 User Manual

Filter reset

You can replace filters even if there is
no filter replacement code displayed on
the screen. After replacing a filter, you
need to reset the filter lifetime counter
manually.
1
Touch and
3 seconds to enter the filter reset
mode (fig. {).
» Code (A3) of the NanoProtect
filter Series 3 displays on the
screen.
2
Touch and hold
force reset the filter lifetime counter
of the NanoProtect filter Series 3
(fig. z).
3
Code (C7) of the Nanoprotect filter
Active Carbon displays on the
screen after the lifetime counter of
the NanoProtect filter Series 3 has
been reset (fig. |).
4
Touch and hold
force reset the filter lifetime counter
of the NanoProtect filter Active
Carbon and exit the filter reset
mode (fig. }).
simultaneously for
for 3 seconds to
for 3 seconds to
7

Storage

1
Turn off the air purifier and unplug
from the power socket.
2
Clean the air purifier, air quality
sensor and pre-filter (see chapter
'Cleaning').
3
Let all parts dry thoroughly before
storing.
4
Wrap the filter and pre-filter
separately in air tight plastic bags.
5
Store the air purifier, the filter and
pre-filter in a cool, dry location.
6
Always thoroughly wash hands after
handling filters.
EN 11