Handling Static-Sensitive Devices - IBM PCI Dual Channel Ultra3 SCSI Adapter Installation And Using Manual

Table of Contents

Advertisement

Handling Static-Sensitive Devices

Attention:
damage, keep this device in its antistatic protective bag until you are ready to install it.
To reduce the possibility of electrostatic discharge, follow the precautions listed below:
v Limit your movement. Movement can cause static electricity to build up around you.
v Handle the device carefully, holding it by its edges or its frame.
v Do not touch solder joints, pins, or other printed circuitry.
v Do not leave the device where others can handle and possibly damage the device.
v While the device is still in its antistatic package, touch it to an unpainted metal part of
the system unit for at least two seconds. (This drains static electricity from the
package and from your body).
v Remove the device from its package and install it directly into your system unit
without setting it down. If it is necessary to set the device down, place it on its
static-protective package. (If your device is an adapter, place it component-side up).
Do not place the device on your system unit cover or on a metal table.
v Take additional care when handling devices during cold weather, as heating reduces
indoor humidity and increases static electricity.
Static electricity can damage this device and your system unit. To avoid
vii

Advertisement

Table of Contents
loading

Table of Contents