Scsi Connectors; Software Requirements - IBM PCI Dual Channel Ultra3 SCSI Adapter Installation And Using Manual

SCSI Connectors

The adapter has the following external and internal connectors:
v External connectors:
– Channel A (J2), Channel B (J3), 68-position, VHDCI (very high density cable
interconnect)
v Internal connectors:
– Channel B (J4), Channel A (J6), 68-position, high-density plastic D-shell SCSI
standard connector for 16-bit attachment
Connectors J2 and J6 are connected as Channel A. Connectors J3 and J4 are
connected as Channel B.
Attention:
same channel is not supported with this adapter. The following figure shows the
external and internal channels.
PCI Dual Channel Ultra3 SCSI Adapter
Channel B (J3)
Note: The adapter has built-in SCSI terminators on each channel that are automatically

Software Requirements

The PCI Dual Channel Ultra3 SCSI Adapter is supported on AIX Version 4.3.3.x and
5.1.x or higher with updates.
2
Installation and Using Guide
Simultaneous use of internally and externally attached devices on the
Channel B (J4)
Channel A (J2)
enabled when a cable is attached to either the external or internal connector.
Channel A (J6)