IBM PCI Dual Channel Ultra3 SCSI Adapter Installation And Using Manual page 16

16. Press Enter.
17. The Install and Update from All Available Software screen displays. Entry data
fields are automatically updated. Press Enter to accept the data.
18. The Are You Sure screen displays. Press Enter to accept the data.
19. The command Status screen displays.
20. The term RUNNING is highlighted to indicate that the install and configure command
is in progress.
When RUNNING changes to OK, scroll down to the bottom of the page and locate
the Installation Summary.
After a successful installation, SUCCESS appears in the Result column of the
summary at the bottom of the page.
21. Remove the installation media from the drive.
22. Press F10 to exit SMIT.
23. Go to Chapter 5, "Installing Adapter Hardware" on page 13.
6
Installation and Using Guide