Assembly And Use For The Cutting Discs - Ninja Nutri BL682EU2 Owner's Manual

Assembly and Use for the Ninja
USE
Fig. 1 Fig. 2
USING THE CHOPPING BLADE ASSEMBLY
1 Review warning and caution statements at the top of page 47
before proceeding to number 2.
2 Holding the Chopping Blade Assembly assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that the
Chopping Blade Assembly fits around the gear shaft and that
it is standing straight.
3 Add the ingredients and secure the bowl lid onto the bowl.
(Fig. 1)
4 Plug the power cord into the electrical outlet and press on the
power button ( ).
5 Select the speed or Auto-iQ ® program that best suits your
needs. Pulse ingredients for even chopping by holding
the Auto-iQ PULSE button until your desired consistency is
reached.
NOTE: Max PULSE iteration is 30 pulses. After 30 pulses
allow 10 minutes to pass before running the PULSE function
up to an additional 30 pulses.
NOTE: Please refer to "Speed Settings & Uses" chart for
suggested uses and speeds.
6 When you have reached your desired consistency, stop the
appliance by pressing the power button ( ) and wait for the
blade to stop turning. (Fig. 2)
7 To remove the lid, press the release button on the lid and turn
it anticlockwise. (Fig. 2)
8
Turn the bowl anticlockwise and lift it to remove it from the
motor base. (Fig. 3)
9
To release the motor base from the counter or tabletop, place
your hands underneath both sides of the motor base and
gently pull the unit up and towards you. (Fig. 4)
48
Processor Bowl - cont.
®
REMOVAL
Fig. 3 Fig. 4
USING THE DOUGH BLADE ASSEMBLY
1 Review warning and caution statements at the top of page 47
before proceeding to number 2.
2 Holding the Dough Blade Assembly by the shaft, place it onto
the gear shaft inside the bowl. Ensure that the Dough Blade
Assembly fits around the gear shaft and that it is standing
straight. (Fig. 5)
3 Add the ingredients and secure the bowl lid onto the bowl.
4
Plug the power cord into the electrical outlet and press on
the power button ( ). Select the LOW/DOUGH button and
process until ingredients come together to form a mass.
NOTE: Please refer to "Speed Settings & Uses" chart for
suggested uses and speeds.
5
Once finished making dough, stop the appliance by pressing
the power button ( ) and wait for the blade to stop turning.
6
To remove the lid, press the release button on the lid and and
turn it anticlockwise. (Fig. 2)
7 Turn the bowl anticlockwise and lift it to remove it from the
motor base. (Fig. 3)
8 To release the motor base from the counter or tabletop, place
your hands underneath both sides of the motor base and
gently pull the unit up and towards you. (Fig. 4)

Assembly and Use for the Cutting Discs

WARNING: The Cutting Discs are sharp. Always use the finger holes when placing or removing the cutting
discs. Failure to do so will result in a risk of laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
USE
shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
IMPORTANT: Make sure that the motor base is plugged in for use.
Fig. 5
USING THE DISCS
NOTE: Cutting Discs must be used with the feed
chute lid.
1
Review warning statements above before proceeding to
number 2.
2 Place the motor base on a clean, dry, level surface
such as a counter or tabletop. Press down on the motor
base to make sure that the suction cups adhere to the
counter or tabletop. (Fig. 1)
3 Secure the bowl onto the motor base.
4 Place the spindle inside the bowl.
5 Use the finger holes to grasp the selected disc and
place it over the spindle.
6 Place the feed chute lid on the bowl and turn clockwise
until you hear a click indicating the lid is locked in
place. (Fig. 1)
7
Plug the power cord into the electrical outlet and press
up on the power toggle ( ) to turn the power "On".
8
Select LOW/DOUGH on the control panel. The discs will
begin spinning.
9 Add the food that you want to slice, shred or grate
through the feed chute on the lid. (Fig. 1) Use the
two-part food pusher to help guide the food through
the feed chute. The middle piece of the food pusher is
removable to use for smaller ingredients.
10 When finished,stop the appliance by pressing the
power button ( ) and wait for the disc to stop turning.
Press the button on the feed chute lid located near the
handle to unlock and turn the lid anticlockwise. Lift to
remove from the processor bowl. Using the finger holes,
carefully lift the disc out of the bowl and remove the
spindle.
11 To release the motor base from the counter or tabletop,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
Fig. 1
www.ninjakitchen.eu 49