32 The maximum rating is based on the Stacked CAUTION: We do not recommend grinding out of container while processing to reduce the Blade Assembly (pitcher) that drives the greatest in any of our Nutri Ninja Cups. ® risk of severe injury to persons or damage to the power and other recommended attachments may appliance.
Assembly and Use of the Pitcher ...................8 Nutri Ninja ® Assembly and Use of the Food Processor ..............10 Ninja Blender ® Assembly and Use of the Nutri Ninja ® Cups ..............12 System with Speed Settings & Uses ....................13 Auto-iQ ™...
Holding the Stacked Blade Assembly by the top of the ( ) will flash and the motor will not work if the shaft, place it onto the drive gear inside the pitcher. The pitcher, food processor bowl, Nutri Ninja ® cups, Pitcher and lid are not installed correctly.
AUTO PUREE LOW / HIGH AUTO DOUGH PULSE NOTE: Nutri Ninja ® | Ninja ® Blender System with Auto- Add the ingredients to the bowl, making sure that they 10 Review warning and caution statements on page 8 WARNING: Never insert your hands in the pitcher ™...
Assembly with care, as the blades are sharp. ® REMOVAL WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be damaged or to shatter, which may cause personal injury. CHOPPING BLADE DOUGH BLADE WARNING: Never leave the appliance unattended while in use.
Vegetables Bowl Assembly Nuts Food Processor Dough Blade Cake Mixes Batters Low/Dough Bowl Assembly Batters * When blending soups or sauces, make sure they’re cooled to room temperature first - Ninja containers are not intended for hot blending. 1-877-646-5288 www.ninjakitchen.com...
Unplug and wait approximately 15 minutes before using again. Hand Washing: Wash the lids, pitcher, food processor The Nutri Ninja Ninja Blender System with Auto-iQ The unit has overheated. Unplug and wait approximately 15 minutes before bowl, Nutri Ninja cup, and blade assemblies in warm, ®...
Page 10
(as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. PRODUCT REGISTRATION Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja product within ten (10) days of ®...
Page 11
Ville St-Laurent, QC H4S 1A7 1-877-646-5288 www.ninjakitchen.com Ninja, Nutri Ninja, Pro Extractor Blades and Sip & Seal are registered trademarks of SharkNinja Operating LLC. Auto-iQ and Total Crushing are trademarks of SharkNinja Operating LLC. Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.