Before First Use; Assembly And Use For The Ninja Blender - Ninja Nutri BL682EU2 Owner's Manual

Before First Use

PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base is
plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the attachment in first.
IMPORTANT: Attachments are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it may
result in damage to the accessories.
44
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
pitcher. Failure to do so
will result in a risk of
laceration.
WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked Blade
Assembly first, holding it
by the shaft. Failure to do
so will result in a risk of laceration.
WARNING: Chopping
Blade Assembly is sharp and
not locked in place. Before
emptying contents carefully
remove lid and Chopping
Blade Assembly or Mini Prep
Bowl Blade Assembly, holding it by the
shaft. Failure to do will result in risk of
laceration.
CAUTION: Do not immerse the motor base into
water or any other liquid.
1 Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2 Wash the lids, containers, discs and blade assemblies
in warm, soapy water. When washing the blade
assemblies, use a dish-washing utensil with a handle to
avoid direct hand contact with blades.
WARNING: Handle the blade assemblies and
discs with care when washing, as the blades are
sharp.
3
Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4 The lids, containers, discs and blade assemblies are all
dishwasher safe. It is recommended that the lids, blade
assemblies and discs be placed on the top rack. Ensure
the blade assemblies and discs are removed from the
containers before placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
Assembly and Use for the Ninja
®
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1
LOW /
DOUGH MED
Fig. 4a
PULSE
HIGH
1 Review warning and caution statements above before DOUGH
LOW
SMOOTHIE PUREE FROZEN SINGLE SERVE
BLENDING
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or tabletop.
3 Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright. (Fig. 1)
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
4 Place the motor base on a clean, dry, level surface such
LOW / MED
DOUGH
as a counter or tabletop.
5
Align and lower the pitcher onto the motor base.
(Fig. 2) Handle should be aligned slightly to the right of
the "LOCK" symbol on the motor base.
6
Rotate the pitcher clockwise until it locks in place, you
will hear a click when the lock is engaged. (Fig. 3)
7 The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 4a, Fig. 4b)
Blender
HIGH PULSE
DOUGH
LOW
FROZEN SINGLE SERVE
SMOOTHIE PUREE BLENDING
Fig. 2
Fig. 3
Fig. 4b
Fig. 5a
8 Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
"MAX LIQUID" mark (2 L) on the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
9 Holding the lid by the handle in the upright position, place
it on top of the pitcher aligning the triangle ( ) located on
the lid with the triangle ( ) located on the pitcher's handle.
(Fig. 5a) Press the handle down until you hear a click.
The triangles on the lid and the blender handle MUST be
aligned in order for the blender to turn on. (Fig. 5b)
10 Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power light
( ) will flash and the motor will not work if the
pitcher and lid are not installed correctly. When
the pitcher and lid are installed properly, the
power light ( ) will be solid, indicating that the
appliance is ready for use.
www.ninjakitchen.eu
Fig. 5b
LOW / MED
DOUGH
45