Before First Use; Control Panel - Ninja FOODI PowerBase CI100EU Instructions Manual

PARTS
NOTE: Attachments and accessories vary by model.
NOTE: Colour varies by model.
A
Power Base
(attached power cord not shown)
B
Hand Mixer Attachment
C Hand Blender Attachment
D Beater x2
E
Dough Hooks x2
F Chopper Processing Lid*
G Chopping Blade Assembly*
H
700ml Chopper Bowl*
I Chopper Storage Lid*
*Not included with all models
There are a variety of accessories that
are compatible with this blender series.
To purchase more accessories and find
great recipes, visit ninjakitchen.eu.
ninjakitchen.eu
A B
TURBO
C D E
H I
F G

BEFORE FIRST USE

IMPORTANT: Review all warnings before proceeding
NOTE: Attachments and accessories vary by model.
1
Remove all packaging materials from the unit. Exercise care when unpacking the hand blender
attachment and chopping blade assembly.
2
Wash hand blender attachment, beaters, dough hooks, chopper bowl, storage lid and chopping
blade assembly in warm, soapy water. Use a dishwashing utensil with a handle to avoid direct contact
with the blades on the hand blender attachment and the chopping blade assembly. Exercise care
when handling blade assemblies, as blades are sharp. Thoroughly rinse and air-dry all parts.
3 Wipe the power base, hand mixer attachment and chopper processing lid with a clean, damp cloth.

CONTROL PANEL

IMPORTANT: Review all warnings before proceeding
USING THE HAND MIXER CONTROL PANEL
1 EJECT
Push to remove the beaters or other accessories.
2 SPEED RANGE INDICATOR
LEDs illuminate to indicate speed settings 1 to 5.
3 POWER
Press to turn the unit on or off.
4 TURBO
Press and hold to quickly jump to speed 5.
5 SPEED SELECTOR
Increase or decrease speed by pressing the up and down arrow buttons.
USING THE HAND BLENDER CONTROL PANEL
1 POWER
Press and hold continuously to blend. The unit will not blend unless the
power button is pressed down.
2 TURBO
While continuously holding to blend, press and hold the TURBO button
to ramp up to high speed. By default, the unit will start on low speed.
USING THE CHOPPER CONTROL PANEL
1 POWER
Press and hold continuously to process. Use short presses for short
pulses and long presses for long pulses.
2 The TURBO button is disabled when using the chopper attachment.
1
2
3 4
5
1
2
TURBO
ninjakitchen.eu