Enable And Disable Settings - IBM PS/2 95 XP 486 Hardware Maintenance Service

5.0 Enable and Disable Settings

To check the settings, select Set and View SCSI Device Configuration from
the Set Configuration menu and see if any Presence Error Reporting devices
are listed (not all devices report).
to "Enabled." Set devices listed but not connected to "Disabled."
F5 to make changes then press F10 to save the changes.
For more information, see "Presence Test" in the Diagnostic Information
for Micro Channel Computers pamphlet.
IBM PS/2 Model 95 XP 486 HMS
Enable and Disable Settings
Set devices connected to the system
¦ Copyright IBM Corp. 1990, 1991
5.0 - 1
Press