Enable And Disable Settings - IBM PS/2 70 Hardware Maintenance Service

6.0 Enable and Disable Settings

To verify that the "Enable" and "Disable" settings are correct, select Set
and View SCSI Device Configuration from the Set Configuration menu, and
determine if there are any "Presence Error Reporting" devices listed.
settings must be as follows:
Devices connected to the system must be set to "Enabled."
Devices listed but not connected must be set to "Disabled."
Change the settings by pressing the F5 key; then save them by pressing the
F10 key.
IBM PS/2 Model 70 HMS
Enable and Disable Settings
¦ Copyright IBM Corp. 1991
6.0 - 1
The