IBM PS/2 95 XP 486 Hardware Maintenance Service page 6

+---+
IS THE FIRST POST ERROR CODE WITHIN THE RANGE OF 02080000 190I TO 02410000
190I?
Yes No
¦ ¦
¦ +---+
¦ ¦008¦
¦ +---+
¦ Go to Step 014.
¦
+---+
¦009¦
+---+
- Restart the system and verify that the "Enable" and "Disable" settings
are correct. (For more information, go to "Enable and Disable Settings"
in topic 5.0.) If you receive a warning on the screen regarding the
"Keep" and "Remove" settings, follow the instructions on the screen
before continuing.
DID YOU HAVE TO CORRECT ANY OF THE ENABLE AND DISABLE SETTINGS?
Yes No
¦ ¦
¦ +---+
¦ ¦010¦
¦ +---+
¦ Go to "Symptom-to-FRU Index" in topic 14.0.
¦ SCSI devices, verify there are no duplicate SCSI ID settings.
¦
+---+
¦011¦
+---+
- Restart the system.
DID THE POST ERROR REMAIN?
Yes No
¦ ¦
¦ +---+
¦ ¦012¦
¦ +---+
¦ Continue with Step 014.
¦
+---+
¦013¦
+---+
Go to "Symptom-to-FRU Index" in topic 14.0.
--------------------------------------------------------------------------
+---+
¦014¦
+---+
- Press Ctrl+Alt+Del.
Ctrl+Alt+Ins and check for the following responses:
1. One or two short beeps.
2. Readable instructions or the Main Menu.
DID YOU RECEIVE THE RESPONSES LISTED PREVIOUSLY?
Yes No
¦ ¦
¦ +---+
¦ ¦015¦
¦ +---+
¦ Go to "Symptom-to-FRU Index" in topic 14.0.
¦ - or -
¦ If that does not correct the problem, go to "Undetermined Problem" in
¦ topic 4.0.
¦
+---+
¦016¦
+---+
- If you are not at the Main Menu, follow the instructions on the screen
to advance to the Main Menu, then press Ctrl+A and run system checkout.
- If the test stops and you cannot continue, go to "Undetermined Problem"
in topic 4.0.
Notes:
1. If the system has incorrect keyboard responses, go to "Keyboard" in
topic 11.0.
2. If the printer has incorrect responses, go to "Printer" in
topic 8.0.
3. If the information panel has missing or distorted digits, go to
"Symptom-to-FRU Index" in topic 14.0.
4. If the display has problems such as jittering, rolling, shifting, or
being out-of-focus, go to "Display Self-Test" in topic 7.0.
5. If a minimum of 896KB of memory is not active, the diagnostic tests
cannot be loaded.
IBM PS/2 Model 95 XP 486 HMS
General Checkout
When the curser moves to the upper right, press
¦ Copyright IBM Corp. 1990, 1991
1.0 - 2
Before replacing any