Installation; Before Installation; Installation Instructions; Installation Materials - Miele DA 2558 Operating And Installation Instructions

Before installation


Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.

Installation instructions

See enclosed Installation sheet for
instructions on how to install this
appliance.
The cooker hood is intended for
installation in a wall unit, chimney unit
or above breakfast bars or island areas.
 Check prior to installation that the top
of the appliance will be accessible
after installation.
If this is not the case, install the exhaust
ducting and prepare the mains
connection before installation.

Installation materials

3.5 x 16 mm screws for securing the
cooker hood.
The screws supplied are intended for
securing the cooker hood to a solid
wooden cabinet floor with a
minimum thickness of 16 mm.
Ensure the cabinet floor can
permanently support the weight of
the appliance.
1 connector for flat ducting to the rear
or the side (only for EXTA models).
Conversion kit for recirculation
mode (the conversion kit is not
supplied and must be ordered
separately, see "Technical data"). The
kit contains an exhaust grille and
aluminium hose with hose clips.
Keep the following in a safe place:
Installation plan
1 lever for replacing the lamps.

Installation

39