Cleaning and care
Charcoal filters
If the cooker hood is connected for
recirculation, two charcoal filters must
be inserted in addition to the grease
filter(s). These are designed to absorb
cooking odours.
The charcoal filters are fitted in the
canopy above the grease filter(s).
Charcoal filters are available to order
from your Miele dealer (see end of this
booklet for contact details).
The charcoal filters are listed under
„Technical data" at the end of this
booklet.
Fitting/replacing charcoal filters
Before fitting or replacing a charcoal
filter, the grease filters must first be
taken out (see previous section for
instructions on how to do this).
Take the charcoal filters out of their
packaging.
Press the charcoal filters into the
frame.
Replace the grease filter(s).
36
When to change the charcoal filters
Replace the charcoal filters when they
no longer absorb kitchen odours
effectively, and at least every 6 months.
The operating hours counter will remind
you to replace the charcoal filters by
lighting up the charcoal filter symbol .
Resetting the charcoal filter
operating hours counter
After changing the charcoal filters, the
operating hours counter needs to be re-
set.
To do this, with the fan switched on,
press the operating hours control
twice, then hold it for approx. 3
seconds until only the 1 is flashing.
The Charcoal filter symbol will go
out.
If you want to replace the charcoal
filters before the operating hours
counter has reached its maximum:
Press the operating hours control
twice and hold it for approx. 6
seconds until only the 1 is flashing.
Disposing of charcoal filters
Used charcoal filters can be disposed
of with normal household waste.