Care And Cleaning; Troubleshooting - Electrolux EQWP4510IK Manual

Steaming
• This is a gentle cooking method, which
keeps a high level of the food's nutrient
content and colour.
• Using fats and oils
When the temperature is too high, the
fat begins to smoke (so-called "smok-
ing point")
Fats /
Oils
Butter

6. CARE AND CLEANING

Clean the appliance after each use.
Always use cookware with clean bottom.
WARNING!
Sharp objects and abrasive clean-
ing agents will damage the appli-
ance.
For your safety, do not clean the
appliance with steam blasters or
high-pressure cleaners.
Scratches or dark stains on the
glass ceramic have no effect on
how the appliance operates.
To remove the dirt:
1. – Remove immediately:melted
plastic, plastic foil, and food with

7. TROUBLESHOOTING

You cannot activate the
appliance or operate it.
Max.
tempera-
ture (°C)
130
Problem
Pork fat
Beef fat
Olive oil
Sunflower
oil
Ground-
nut oil
Smoke
Coconut
point (°C)
oil
The Power function is suitable for heating
150
large quantities of water.
2.
3.
Possible cause
You touched 2 or more
sensor fields at the same
time.
The STOP+GO function
operates.
170
180
180
200
200
200
sugar. If not, the dirt can cause
damage to the appliance. Use a
special scraper for the glass . Put
the scraper on the glass surface at
an acute angle and move the blade
on the surface .
– Remove after the appliance is
sufficiently cool:limescale rings ,
water rings, fat stains, shiny metal-
lic discolorations. Use a special
cleaning agent for glass ceramic or
stainless steel.
Clean the appliance with a moist cloth
and some detergent.
At the end rub the appliance dry
with a clean cloth.
Remedy
Activate the appliance
again and set the heat
setting in less than 10
seconds.
Touch only one sensor
field.
Refer to the chapter "Daily
Use".
ENGLISH 31
200
210
200
220
235
240