Samsung LNR1550 Manual page 4

01 BN68-00816A-00.qxd
I
N S TA L L AT I O N
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is
connected to the
ANT OUT terminal on
your cable box.
2
Connect the other end
of this cable to the
ANT IN terminal on the
back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths
of RF cable. (These items are available at most electronics stores.)
1
Find and disconnect
the cable that is
connected to the
ANT IN terminal on
your cable box.
2
Connect this cable to a
two-way splitter.
3
Connect a RF cable
between an OUTPUT
terminal on the splitter
and the IN terminal on
the cable box.
2/1/05 4:14 PM Page 8
ANT IN
Incoming
ANT OUT
ANT IN
cable
Splitter
Incoming
cable
Splitter
English-4
This terminal might be labeled
"ANT OUT", "VHF OUT", or
simply, "OUT".
This terminal might be labeled
"ANT IN", "VHF IN", or simply,
"IN".
Cable Box