General Information; Safety Instructions; Other Symbols In This Documentation - AEG MTE 350 Operation And Installation

OPERATION

1. General information

The chapter "Operation" is intended for appliance users
and qualified contractors.
The chapter "Installation" is intended for qualified con-
tractors.
Note
Read these instructions carefully before using the
appliance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1

Safety instructions

1.1.1 Structure of safety instructions
KEYWORD Type of risk
Here, possible consequences are listed that may
result from failure to observe the safety instruc-
tions.
» Steps to prevent the risk are listed.
Operation - for users and contractors
1.1.2 Symbols, type of risk
Symbol Type of risk
Injury
!
Electrocution
Burns
(burns, scalding)
1.1.3 Keywords
KEYWORD Meaning
DANGER Failure to observe this information will result in seri-
ous injury or death.
WARNING Failure to observe this information may result in seri-
ous injury or death.
CAUTION Failure to observe this information may result in
non-serious or minor injury.

1.2 Other symbols in this documentation

Note
Notes are bordered by horizontal lines above and
below the text. General information is identified by
the symbol shown on the left.
» Read these texts carefully.
29