Teka NFL 350 E-INOX Instruction Manual page 47

Remove the upper cover of refrigerating chamber door,install the upper hinge sleeve,door signal line to
5)a)
the other side and install the door upper cover,
Dismantle the stopper and sleeve pipe from the right bottom of freezing chamber door, take out another spare
stopper(for reversible door), and assemble the sleeve pipe and spare stopper on left bottom of door by screw
install the upper hinge sleeve , door signal line to the other side and install the door upper cover.
b)Dismantle the stopper and sleeve pipe from the right bottom of freezing chamber door, take out another spare
stopper(for reversible door), and assemble the sleeve pipe and spare stopper on left bottom of door by screw
Take off the sleeve pipe and hole caps on the freezing chamber door and mount it on the other side.
6)Put freezing door on bottom hinge and install middle hinge, hole caps
7) Take out the left top hinge , left top hinge cover from accessories package.
Put refrigerating door on middle hinge ,
terminal①,connect
For the assembly of handle, please refer to chapter 2.2.
hinge cover
（The picture above is only for reference.
The actual configuration will depend on the
physical product or statement by the distributor）
door signal line
door upper cover
sleeve pipe
stopper
stopper screw
a
middle hinge
install
signal line terminal ② with
④
①
sleeve pipe
hole cap
top hinge.connect signal line
signal line terminal③;
②
9
sleeve pipe
stopper
stopper screw
b
terminal ④ with
install top hinge cover and hole cover.
hole cover
③
signal line