Table of Contents
Advertisement
Capturing the displayed screen
You can capture the currently displayed
screen as a still image (Take screenshot).
For some applications, capturing of the
･
screenshot is not available.
On a screen to capture, press and
1
hold the power key and the
volume down key at the same time
for at least 1 second.
The still image is saved and
･
on the status bar.
❖ Information
Alternatively, press and hold the power key for at
･
u
least 1 second
Tap [Screenshot] to capture a
screenshot.
Drag the status bar down
･
screenshot to view the captured image in the
"Album" or "Photos" application. Also, open the
notification of screenshot (P.62) and then tap the
operating menu item to send, edit or delete the
image.
Setting Emergency mode
In case of emergency such as disaster, restrict
functions to save the battery power.
Press and hold the power key for at
1
least 1 second.
appears
u
Tap the notification of
[Emergency mode]
2
INFORMATION]
important information
Mark "I have read the important
3
information"
The terminal restarts.
･
❖ Information
To cancel Emergency mode, operate any of the
･
following (The terminal restarts when canceling).
- Press and hold the power key for at least 1 second
u
[Emergency mode]
- Drag the status bar down
of emergency mode (P.62)
u
on]
[TURN OFF].
- From the home screen of Emergency mode, tap
u
[Turn off emergency mode]
To check available applications in emergency mode
･
or notes, from the Home screen, tap [apps folder]
u
u
[Settings]
[Battery]
[IMPORTANT INFORMATION] and see the
information.
In emergency mode, from the emergency mode
home screen, tap
see the information.
If you set/cancel the emergency mode, you may
･
need to reconfigure widgets etc. on the Home
screen.
Before Using the Terminal
u
[IMPORTANT
u
Confirm the
u
[CLOSE].
u
[TURN ON].
u
[TURN OFF].
u
Open the notification
u
[Emergency mode is
u
[TURN OFF].
u
[Emergency mode]
u
[About emergency mode] to
u
57
Advertisement
Chapters
Table of Contents
