Data Communication; Bluetooth Function - Sony NTT docomo SO-01M Instruction Manual

Data communication

Bluetooth function

Bluetooth function is a technology which
enables to connect with Bluetooth device
such as PC, handsfree headset wirelessly.
The terminal does not connect wirelessly with
･
all types of Bluetooth devices.
Supported Bluetooth profiles (P.249)
･
❖ Information
On/OFF setting of the Bluetooth function is kept
･
even if you turn off the power.
When you do not use Bluetooth function, turn it off
･
to save the battery.
To switch ON/OFF of Bluetooth function, from the
･
Home screen, tap [apps folder]
u
connection] [Connection preferences]
u
[Bluetooth] /
Reception interference caused by
■
wireless LAN devices
The terminal's Bluetooth function and
wireless LAN devices use the same
frequency band (2.4GHz). If you use the
terminal near a wireless LAN device,
reception interference may occur or the
communications speed may lower. Also,
you may hear noise or have a connection
problem. In these cases, do the following:
u u
[Settings] [Device
u
.
Keep the Bluetooth device approximately
･
10 m or more away from a wireless LAN
device.
Within approximately 10 m, turn off either
･
the Bluetooth device or the wireless LAN
device.
Making the terminal detectable
From the Home screen, [apps
1
u
folder] [Settings]
connection].
[Pair new device].
2
Tap [Device name] to change the name
･
of the terminal when displayed on the
other Bluetooth device.
Making pair setting for the
terminal and Bluetooth device
To connect the terminal and Bluetooth
device, pair them first.
Once paired, the setting with the Bluetooth
･
device is saved.
For make pair setting, entering passcode (PIN)
･
may be required. Passcode (PIN) of the
terminal is "0000". If you cannot make pair
setting when you enter "0000", see the
documentation of your Bluetooth device.
u
[Device
Data communication
215