Table of Contents
Advertisement
PIN code
■
The docomo nano UIM card has a security
code of PIN code. The code is set to "0000"
at subscription, which you can change by
yourself (P.50).
PIN code is a 4- to 8-digit security number
(code) that must be entered for user
confirmation to prevent unauthorized use
of docomo nano UIM card by a third party
every time you insert the docomo nano UIM
card into the terminal or when the terminal
is powered on. Entering the PIN code
enables making/receiving calls and
terminal operation.
If you use a newly purchased terminal
･
with docomo nano UIM card you have
been using, use the PIN code set on the
former terminal. If you did not change the
setting, the code is "0000".
If you enter a wrong PIN code 3 times
･
consecutively, the PIN code is locked and
cannot be used anymore. In this case,
unlock with "PIN Unlock Key (PUK code)"
(P.49).
PIN Unlock Key (PUK code)
■
The PUK code is an 8-digit number for
canceling the locked PIN code. The PUK
code cannot be changed by yourself.
If you failed to enter PUK code 10 times
･
consecutively, the docomo nano UIM
card is locked. Please contact a docomo
Shop.
Setting a PIN code
By entering PIN code when powered on, you
can protect from improper use.
From the Home screen, [apps
1
u
folder]
[Settings]
u
security]
[Advanced]
u
lock]
[Lock SIM card].
Enter PIN code
2
Entering the PIN code when powered
on
On the PIN code entry screen,
1
enter the PIN code.
.
2
Before Using the Terminal
u
[Lock screen &
u
[SIM card
u
[OK].
49
Advertisement
Chapters
Table of Contents
