Cessna 150 Series Service Manual page 3

TEMPORARY REVISION NUMBER 2
DATED 7 January 2000
MANUAL TITLE MODEL 150 SERIES 1977 SERVICE MANUAL
MANUAL NUMBER - PAPER COPY D2011-1-13
AEROFICHE D2011-1-13AF
TEMPORARY REVISION NUMBER PAPER COPY D2011-1TR2
AEROFICHE N/A
MANUAL DATE 1 JULY 1976
REVISION NUMBER 1 DATE 1 AUGUST 1995
This Temporary Revision consists of the following pages, which affect existing pages in the
paper copy manual and supersede aerofiche information.
AEROFICHE
AEROFICHE
SECTION PAGE FICHE/FRAME SECTION
PAGE FICHE/FRAME
2 22A
Added
2 26A Added
18 4A Added
REASON FOR TEMPORARY REVISION
To include the inspection requirements of Cessna Service Bulletin SEB99-18.
To provide additional information for the stop drilling of cracks that originate at the trailing edge
of control surfaces with corrugated skins.
FILING INSTRUCTIONS FOR THIS TEMPORARY REVISION
For Paper Publications:
File this cover sheet behind the publication's title page to identify the inclusion of the
Temporary Revision into the manual. Insert the new pages into the publication at the
appropriate locations. Draw a line, with a permanent red ink marker, through any
superceded information.
For Aerofiche Publications:
Draw a line through any aerofiche frame (page) affected by the Temporary Revision with a
permanent red ink marker. This will be a visual identifier that the information on the frame
(page) is no longer valid and the Temporary Revision should be referenced. For "added"
pages in a Temporary Revision, draw a vertical line between the applicable frames which is
wide enough to show on the edges of the pages. Temporary Revisions should be collected
and maintained in a notebook or binder near the aerofiche library for quick reference.
COPYRIGHT © 2000
CESSNA AIRCRAFT COMPANY
WICHITA, KANSAS, USA