Cessna 150 Series Service Manual page 228

WING
12 INCH WIDE
HEAVY CANVAS
1 X 12 X 8
30-3/4
INCH DIAMETER BOLTS
12 1.4X
44
ALL DIMENSIONS ARE IN G
ALL DIMENSIONS ARE IN INCHES
Figure 18-1.
Wing and Fuselage Support Stands
cracks may be stop-drilled and dents straightened if
18-72. REPAIR OF REINFORCEMENT ANGLES.
they are reinforced on the inner side with a doubler
Cowl reinforcement angles, if damaged, must be
of the same material.
Bonded cowling may be re-
replaced. Due to thier small size they are easier
paired by the same methods used for riveted struc-
to replace than to repair.
ture. Rivets are a satisfactory substitute for bonded
seams on these assemblies.
The strength of the
18-73. REPAIR OF ABS COMPONENTS.
Rezolin
bonded seams in cowling may be replaced by a single
Repair Kit Number 404 may be obtained from the
3/32, 2117-AD rivet per running inch of bond seam.
Cessna Service Parts Center for repair of ABS
The standard repair procedures outlined in AC43. 13-
components.
1 are also applicable to cowling.
18-6