If it recognizes the number, Voice Dial repeats and dials the number. If
Voice Dial is not sure it has recognized the number, it displays a choice list
of up to three numbers and prompts you with "Did you say?" followed by
the first number on the list.
Say "Yes" to confirm the number or "No" to hear the next one, or use the
4.
keypad to select the correct number from the list. (See "Choice Lists"
page 121
• Press the Repeat (right) soft key (
• Press the Settings (left) soft key (
(
) to exit Voice Dial without dialing.
Pause Dialing From a Contacts Entry
If you voice dial a contact that contains (two-second) T pause(s) simply wait for the
•
pauses to pass and the dialing to complete.
If you voice dial a contact that contains (hard) P pause(s), wait for the appropriate
•
prompt(s) from the number you are calling (credit card number, bank account
number, and so on) and enter the appropriate response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
A ring tone sounds and/or your phone vibrates (Your phone provides eight ring
•
volume settings including: Ringer Off,
Medium/High, High
callers.)
A phone number (unless blocked by the caller) and a name appear in the display (If
•
the caller's number and name are stored in your Contacts list).
If the caller can't be identified, Call from unavailable#, Call from restricted
•
number, or no number appears in the display.
Your phone continues to notify you of the call until one of the following events
•
occurs:
You answer the call.
•
You ignore the call.
•
The calling party ends the call.
•
The call is sent to voicemail.
•
Answering an Incoming Call
Press the
voice can be heard in the earpiece.
28
, for more information.)
Vibrate
Vibrate/High, and/or
, or
key. The ring tone and/or vibration stop and the caller's
) to say the name again.
), then press the Exit (right) soft key
Low, Low/Medium, Medium,
,
different ring types to distinguish
on