Note: The TTY icon (
) appears in the top of the display when the phone is in standby mode.
Voice Privacy
Voice Privacy when enabled (that is, set to Enhanced), turns on advanced voice
encryption.
In standby mode, press the MENU key (
1.
Settings), and
following options appear in the display:
Standard
•
Enhanced
•
Use the Up and Down navigation keys to highlight the Voice Privacy option
2.
of your choice, then press
Data Settings
Use the Data Settings menu to configure data connection settings.
In standby mode, press the MENU key (
1.
Settings), and
The following options appear in the display:
2.
• Data Off — No incoming data calls accepted.
• Data For Next Call — Wait for data call for the next 10 minutes.
• Data Until Powered Off — Data calls only, no voice calls accepted, until you
power the phone off and on again.
Use the Up and Down navigation keys to highlight the data setting of your
3.
choice, then press
DTMF Tones
Use this menu to set DTMF settings to Normal, or Long.
In standby mode, press the MENU key (
1.
Settings), and
following options appear in the display:
• Normal — Select for a normal tone
• Long — Select for an extended tone
Use the Up and Down navigation keys to highlight the DTMF Tones setting
2.
of your choice, then press
(for Call Settings), and
— Voice privacy is disabled
— Voice privacy is enabled
. Your settings are saved.
OK
(for Call Settings), and
. Your setting is saved.
OK
(for Call Settings), and
. Your setting is saved.
OK
), then press
OK
for Voice Privacy. The
), then press
OK
for Data Settings.
), then press
OK
for DTMF Tones. The
Changing Your Settings 143
Call Settings
(for
(for
(for