Samsung SCHR510 User Manual page 123

Use the navigation keys to highlight Adapt Digits, then press the
2.
Your phone displays the first digit sequence and "Please say" plays
through the speaker followed by the four digits appearing in the display.
Wait for the beep and say the digits using your normal tone of voice. After a
3.
moment, the phone plays back the recording and prompts "Did the
recording sound ok?"
• If the recording was good, say "Yes."
• If you need to re-record, say "No."
If you say "No," the phone prompts you to pronounce the digits again. Wait
for the beep and then say the digits.
Repeat this step until you're satisfied with the recording.
After confirming that the recording sounds "ok", continue the recording
4.
process with the next set of digits.
After six sets of digits, the phone asks whether you want to do more
5.
adaptation. Answer "Yes."
Repeat steps 4 and 5 for another six sets of digits. After the second group
6.
of six sets of digits, "Adaptation complete" plays through the speaker
and you are returned to the Adapt Digits menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
In standby mode, press the MENU key (
1.
and
@ ) )
Digit Dialing. The following options appear in the display:
• Adapt Digits
• Reset Digits
Use the navigation keys to highlight Reset Digits, then press the
2.
The phone prompts you to confirm digit adaptation rest.
Press the OK (left) soft key (
the Back (right) soft key (
adaptation.
Press the
3.
Sound
Sound lets you specify what (if any) text prompts you want your phone to read to you
through the earpiece.
In standby mode, press the MENU key (
1.
(for Voice Service),
key to save and exit.
OK
), then press
OK
(for Voice Settings), and
) to reset your digit adaptation, or press
) to cancel and retain your digit
), then press
OK
Voice Service
key
.
OK
(for Tools),
for
key.
OK
(for Tools),
Tools 123